Konica Minolta AccurioLabel 190 bizhub PRESS C71cf/AccurioLabel 190 Quick Guid - Page 90
Setting a media to the main body, Open the, and move the, to attach
View all Konica Minolta AccurioLabel 190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
4.3 Weekly Cleaning Setting a media to the main body NOTICE NOTICE Turn on the main power switch and the sub power switch of the main body and turn on Roll Winder RW-101/Roll Winder RW-201 beforehand. To load the media on the machine, set the tension as shown below. For the setting procedure, refer to page 3-15. - Position of tension roller 2: Top - Aligning roller condition: Rotate - Position of tension roller 4: Bottom - Air level of paper feed loop fan: Auto " Open the front door of Roll Winder RW-101 and move the lever to attach the rubber roller. # On the touch panel on Roll Winder RW-201, select [Menu] - [1. Machine state/2. Machine setting] - [2] to set [Unwinder Online], [Rewinder Offline]. 4-27
4-27
4.3
Weekly Cleaning
Setting a media to the main body
NOTICE
NOTICE
Turn on the
main power switch
and the
sub power switch
of the main body and turn on
Roll Winder RW-101
/
Roll
Winder RW-201
beforehand.
To load the media on the machine, set the tension as shown below. For the setting procedure, refer to page 3-15.
-
Position of
tension roller 2
: Top
-
Aligning roller
condition: Rotate
-
Position of
tension roller 4
: Bottom
-
Air level of
paper feed loop fan
: Auto
A
Open the
front door
of
Roll Winder RW-101
and move the
lever
to attach the
rubber
roller
.
B
On the
touch panel
on
Roll Winder RW-201
, select [Menu] - [1. Machine state/2.
Machine setting] - [2] to set [Unwinder Online], [Rewinder Offline].