Konica Minolta AccurioLabel 190 bizhub PRESS C71cf/AccurioLabel 190 Quick Guid - Page 42
counterclockwise and confirm that the, is stored in
View all Konica Minolta AccurioLabel 190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3.2 Changing the Media % Open the media cover of Roll Winder RW-101. Open the media cover fully until it stops. & Rotate the lug protruding/retracting handle counterclockwise and confirm that the lug is stored in the feeding shaft. When the lug protruding/retracting handle is tight and cannot be turned by hand, pass a Phillips screwdriver etc. through the hole of the lug protruding/retracting handle and rotate. ' Remove the media core of the unchanged media from the feeding shaft. If the remaining amount of media is large, it will be heavy. Remove the media using a lifter, etc. ( Using a lifter, adjust the center of the media core and feeding shaft. 3-4
3-4
3.2
Changing the Media
D
Open the
media cover
of
Roll Winder RW-101
.
Open the
media cover
fully until it stops.
E
Rotate the
lug protruding/retracting handle
counterclockwise and confirm that the
lug
is stored in the
feeding shaft
.
When the
lug protruding/retracting handle
is tight and cannot be turned by hand, pass a Phillips
screwdriver etc. through the hole of the
lug protruding/retracting handle
and rotate.
F
Remove the media core of the unchanged media from the
feeding shaft
.
If the remaining amount of media is large, it will be heavy. Remove the media using a lifter, etc.
G
Using a lifter, adjust the center of the media core and
feeding shaft
.