Konica Minolta AccurioLabel 190 bizhub PRESS C71cf/AccurioLabel 190 Quick Guid - Page 113
Tighten the screws., Check the conveyance and if the meandering paper issue is not resolved
View all Konica Minolta AccurioLabel 190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Accurio Label 190/bizhub PRESS C71cf - When you move the knob to the right, the media is fed into the printer while curving backward. $ Tighten the screws. % Check the conveyance and if the meandering paper issue is not resolved, repeat step 1-3. When the edge of the media slightly touches the media guide (conveyance guide of tension roller 1) in the front or back side for 20 or more seconds, the meandering paper issue is resolved. (The figure below shows an example in which the media edge slightly comes into contact with the media guide in the back side.) 0mm 0.5mm NOTICE NOTICE Be sure to move the knob one mark at a time. If the error persists, go to page 5-20. 5 5-19
5-19
Accurio Label 190/bizhub PRESS C71cf
5
-
When you move the knob to the right, the media is fed into the printer while curving backward.
C
Tighten the screws.
D
Check the conveyance and if the meandering paper issue is not resolved, repeat step
1-3.
When the edge of the media slightly touches the
media guide
(conveyance guide of
tension roller 1
) in
the front or back side for 20 or more seconds, the meandering paper issue is resolved. (The figure below
shows an example in which the media edge slightly comes into contact with the
media guide
in the back
side.)
NOTICE
NOTICE
Be sure to move the knob one mark at a time.
If the error persists, go to page 5-20.
0.5
mm
0
mm