Konica Minolta AccurioLabel 190 bizhub PRESS C71cf/AccurioLabel 190 Quick Guid - Page 116

Adjust the Position of the media guides, A media feeding error occurs, media guide, tension roller 1

Get Konica Minolta AccurioLabel 190 PDF manuals and user guides View all Konica Minolta AccurioLabel 190 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 116 highlights

5.5 A media feeding error occurs )Adjust the Position of the media guides If the error persists, perform the following procedure: % The media guide (back side) of the tension roller 1, which is set to the reference position (35 mm / 1.38" away from the metal plate), to a position that will not cause any damage or break the media edge. - If a damage or break occurs in the back side of media, adjust the position of the media guide in the back side forward. When adjusting the position, move the guide in 0.5 mm/0.02" units. 0.5mm - If a damage or break occurs in the front side of media, adjust the position of the media guide in the back side backward. When adjusting the position, move the guide in 0.5 mm/0.02" units. 5-22 0.5mm

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
5-22
5.5
A media feeding error occurs
)
Adjust the Position of the media guides
If the error persists, perform the following procedure:
%
The
media guide
(back side) of the
tension roller 1
, which is set to the reference position
(35 mm / 1.38" away from the metal plate), to a position that will not cause any damage or break the
media edge.
-
If a damage or break occurs in the back side of media, adjust the position of the
media guide
in the
back side forward. When adjusting the position, move the guide in 0.5 mm/0.02" units.
-
If a damage or break occurs in the front side of media, adjust the position of the
media guide
in the
back side backward. When adjusting the position, move the guide in 0.5 mm/0.02" units.
0.5
mm
0.5
mm