Konica Minolta AccurioLabel 190 bizhub PRESS C71cf/AccurioLabel 190 Quick Guid - Page 16
Control Panel (Roll Winder RW-101/Roll Winder RW-201), Roll Winder RW-101
View all Konica Minolta AccurioLabel 190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
1.2 Machine Panel Control Panel (Roll Winder RW-101/Roll Winder RW-201) This section describes the control panel of Roll Winder RW-101 and Roll Winder RW-201. )Roll Winder RW-101 2 3 4 EMG.RESET WEB GRIPPER2 WEB GRIPPER1 1 STOP READY JOG No. Name 1 EMERGENCY STOP 2 EMG.RESET 3 WEB GRIPPER2 4 WEB GRIPPER1 5 STOP 6 READY 7 JOG 1-8 5 6 7 Description Press to stop this system in case of emergency. Use only in case of emergency. Pressing EMERGENCY STOP stops the machine immediately. To reset that emergency stop status, press EMG.RESET and also turn EMERGENCY STOP to the right. Do not press EMERGENCY STOP to stop usual printing. It may result the machine and media being damaged. When this system stops immediately, clear the error and confirm the top cover is closed, and then press EMG.RESET to reset the emergency stop. If WEB GRIPPER2 is set to on, the media pressing bar 2 is activated, if WEB GRIPPER2 is set to off, the media pressing bar 2 is deactivated. Use to replace the media on Roll Winder RW-101. Make sure the button is set to off before printing. If WEB GRIPPER1 is set to on, the media pressing bar 1 is activated, if WEB GRIPPER1 is set to off, the media pressing bar 1 is deactivated. Use to replace the media on Roll Winder RW-101. Make sure the button is set to off before printing. Stops jobs while conveying a paper and printing. Stops the whole system. • The LED lights up in the emergency stop status. • When Roll Winder RW-101 is stopped, the LED blinks. • Press STOP while the LED flickers, the LED turns off and the stop status is canceled. Rotate the feeding shaft of Roll Winder RW-101 alone and convey the media. If READY is pressed while the machine is stopped and offline, the alarm beeps for three seconds. For five seconds after the time the alarm stops, JOG is effective. When the machine is stopped and offline, you can operate the conveyer of Roll Winder RW-101 for five seconds from the time READY is pressed and the alarm stops beeping. While pressing JOG, the conveyer operates. Use the function when adjusting the media. If JOG is not pressed within five seconds, or STOP is pressed, newly press READY.