Konica Minolta AccurioLabel 190 bizhub PRESS C71cf/AccurioLabel 190 Quick Guid - Page 40
Changing the Media, Reference
View all Konica Minolta AccurioLabel 190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3.2 Changing the Media 3.2 Changing the Media This section describes how to change the media by adding the media with using the workbench of Roll Winder RW101. Operate the following procedures to replace the media. Before changing the media, prepare the following items. - Cutter knife - Masking tape (width more than 30 mm / 1.18") - Ruler - Phillips screwdriver and other tool - Lifter NOTICE NOTICE Before setting or changing the media, turn on the main power switch and sub power switch of the main body, and the power switch of Roll Winder RW-101/Roll Winder RW-201. Reference For details on how to set the media, refer to the HTML User's Guide. ■ Workflow Set the Media to the Feeding Shaft: page 3-3 Connect the Media Using the workbench: page 3-7 Adjust the Media Tension: page 3-10 Convey the Media: page 3-19 3-2