Home » Konica Minolta Manuals » Printers » Konica Minolta AccurioLabel 190 » Manual Viewer

Konica Minolta AccurioLabel 190 bizhub PRESS C71cf/AccurioLabel 190 Quick Guid - Page 36

Press [Output]., Job Printing, HTML User's, Guide, control panel, Roll Winder RW-101

View all Konica Minolta AccurioLabel 190 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

2.2 Job Printing ( Press [Output]. - It is recommended to press [Job Ticket] and reconfirm [Set Number], [Paper Type], and [Thickness] (or [Weight]) on the [Job Ticket Edit] screen before pressing [Output]. - The maximum length you can print continuously is 300 m / 984.24'. If you attempt to print a job whose total length exceeds 300 m / 984.24', the message [Cancel this job?] is displayed when you press [Output]. Press any of the following buttons: [Cancel Job], [Output (All)], or [Output (Limit)]. - [Cancel Job]: This job is canceled. - [Output (All)]: A blank page is inserted after 300 m / 984.24' is printed for adjusting the machine system. After the machine adjustment, another 300 m / 984.24' is printed. - [Output (Limit)]: The first 300 m / 984.24' is printed and subsequent printing is canceled. - Continuous job printing is possible until the total of blank amounts specified in [Blank Amount Setting between Continuous Jobs] reaches 300 m / 984.24'. If the blank amount between continuous jobs exceeds 3 m / 9.84', it is calculated as 3 m / 9.84'. The blank page setting can be configured on the [UTILITY] screen. For details, refer to the HTML User's Guide. -The maximum distance of continuous print can be changed from 300 m / 984.24' to 1,000 m / 3,280.84'. For details, contact your service representative. Tips To pause or cancel output operation, press Stop on the control panel of the main body or STOP on the control panel of Roll Winder RW-101/Roll Winder RW-201. 2-18

Section	Page
Intended Use of this Machine	3
Intended use	3
Impermissible operating conditions	3
Exclusion of liability	3
Target groups	3
Configuration and Usage of this Manual	4
HTML User's Guide Operating Environment	5
Supported Operating Systems and Browsers	5
Display resolution	5
How to open the top page of the HTML User's Guide	5
Title of Contents	6
1 Before Using This Machine	9
1.1 Power-On/Off	9
Main Body Power-On/Off	9
Turn the Main Body On	9
Turn the Main Body Off	12
Turn On/Off Roll Winder RW-101/Roll Winder RW-201	13
Turn On Roll Winder RW-101/Roll Winder RW-201	13
Turn Off Roll Winder RW-101/Roll Winder RW-201	13
1.2 Machine Panel	14
Control Panel (Main Body)	14
Control Panel (Roll Winder RW-101/Roll Winder RW-201)	16
Roll Winder RW-101	16
Roll Winder RW-201	17
Touch panel (Roll Winder RW-201)	18
[Menu] Screen	18
2 Printing Workflow	19
2.1 Before Printing	21
Step 1: Cleaning	21
Step 2: Prepare Media	21
Step 3: Prepare this Machine	22
Step 4: Adjust (Image Position and Image Quality)	26
Image Position Adjustment	26
Image Quality Adjustment	26
2.2 Job Printing	27
Step 1: Prepare Print Data	27
Step 2: Send Print Data	28
Step 3: Print Test Pages	29
Step 4: Print All Pages	33
2.3 Operation After Printing	37
Step 1: Replace the Media Core	37
Step 2: Idle the machine	37
3 Handling paper	39
3.1 Media Route	39
3.2 Changing the Media	40
Set the Media to the Feeding Shaft	41
Connect the Media Using the workbench	45
Adjust the Media Tension	48
Specify the Paper Type and Thickness (Weight)	48
Adjust the tension according to the type of media being used.	51
Adjusting the Position of the Tension Roller 2 (top/bottom)	53
Adjusting the Aligning Roller (rotate/fix)	54
Adjusting the position of the tension roller 4 (high/low)	55
Specify the Air Level of the Paper Feed Loop Fan (Auto/Weak/Strong)	56
Convey the Media	57
3.3 Replacing the Media Core	58
Set the Media core to the Winding Shaft	58
3.4 Splicing the Media (For cleaning/clearing paper jam)	62
Connect the Media Using the workbench	62
4 Cleaning	64
4.1 Cleaning parts and intervals	64
4.2 Daily Cleaning	65
Cleaning Roll Winder RW-101	66
Cleaning the Leading Section	67
Cleaning the Delivering Section	72
Cleaning Roll Winder RW-201	74
Adjusting the Positions of the Media and Parts	79
4.3 Weekly Cleaning	83
Cleaning the Interior of the Main Body	83
Setting a media to the main body	90
4.4 Cleaning the Exterior of the Main Body	93
4.5 Cleaning the Control Panel	94
5 Troubleshooting	95
5.1 Replenishing toner supply	95
5.2 Replacing the waste toner box	97
5.3 Stop by Paper Mismatch during Printing	99
Start the printing job after changing the media which is set on the printing job	99
Forcibly Print on the Set Media	102
5.4 Clear Paper Jams	103
How to View the Animation Guidance	103
[JAM Position] screen	103
JAM Code List	104
Removing Paper Jam inside the Main Body	106
5.5 A media feeding error occurs	110
If a Meandering Paper Has Occurred	111
Resolve a meandering paper issue by adjusting the aligning roller	112
Changing the media tension	114
Paper Leans to One Side	115
Adjust the Position of the media guides	116
Adjust the aligning roller to Resolve the Problem	118
The JAM code J-1714 is displayed	120
Changing the media tension	121
The JAM code J-3105 is displayed	122
Changing the media tension	123
5.6 How to Reset Emergency Stop	124
If JAM code J-5102 is displayed	124
Recover from Abrupt Stop of Power Supply	125
5.7 If you have forgotten the administrator password	126
6 Appendix	127
6.1 How to Use the HTML User's Guide Well	127
(1) Master Search Functions!	127
(2) Check the setting required for the target finishing using an operation example!	127
6.2 Name of each Component	128
Main Body	128
External Machine Items	128
Internal Machine Items	130
Leading section	132
Delivering section	133
Roll Winder RW-101	134
External Machine Items	134
Internal Machine Items	135
Roll Winder RW-201	136
External Machine Items	136
Internal Machine Items	137
Status Indicator Light MK-744	138
6.3 Typical Specifications	139
Main Body	139
Roll Winder RW-101	139

Match case Limit results 1 per page

2-18

2.2

Job Printing

Press [Output].

It is recommended to press [Job Ticket] and reconfirm [Set Number], [Paper Type], and [Thickness]

(or [Weight]) on the [Job Ticket Edit] screen before pressing [Output].

The maximum length you can print continuously is 300 m / 984.24'. If you attempt to print a job

whose total length exceeds 300 m / 984.24', the message [Cancel this job?] is displayed when you

press [Output]. Press any of the following buttons: [Cancel Job], [Output (All)], or [Output (Limit)].

[Cancel Job]: This job is canceled.

[Output (All)]: A blank page is inserted after 300 m / 984.24' is printed for adjusting the machine

system. After the machine adjustment, another 300 m / 984.24' is printed.

[Output (Limit)]: The first 300 m / 984.24' is printed and subsequent printing is canceled.

Continuous job printing is possible until the total of blank amounts specified in [Blank Amount

Setting between Continuous Jobs] reaches 300 m / 984.24’.

If the blank amount between continuous jobs exceeds 3 m / 9.84', it is calculated as 3 m / 9.84'. The

blank page setting can be configured on the [UTILITY] screen. For details, refer to the

HTML User's

Guide

The maximum distance of continuous print can be changed from 300 m / 984.24'

to 1,000 m /

3,280.84'. For details, contact your service representative.

Tips

To pause or cancel output operation, press

Stop

on the

control panel

of the main body or

STOP

on the

control panel

Roll Winder RW-101

Roll Winder RW-201