Konica Minolta AccurioLabel 190 bizhub PRESS C71cf/AccurioLabel 190 Quick Guid - Page 17
Roll Winder RW-201, REWIND MOTOR
View all Konica Minolta AccurioLabel 190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
)Roll Winder RW-201 1 No. Name 1 EMERGENCY STOP 2 EMG.RESET 3 REWIND MOTOR ON 4 REWIND MOTOR OFF 5 STOP 6 READY 7 JOG Accurio Label 190/bizhub PRESS C71cf 2 3 4 EMG.RESET REWIND MOTOR ON REWIND MOTOR OFF STOP READY JOG 5 6 7 Description Press to stop this system in case of emergency. Use only in case of emergency. Pressing EMERGENCY STOP stops the machine immediately. To reset that emergency stop status, press EMG.RESET and also turn EMERGENCY STOP to the right. Do not press EMERGENCY STOP to stop usual printing. It may result the machine and media being damaged. When this system stops in immediately, clear the error and confirm the top cover is closed, and then press EMG.RESET to reset the emergency stop. When REWIND MOTOR ON is turned off, the machine does not start printing. Press REWIND MOTOR ON and light REWIND MOTOR ON to start printing. Turn off REWIND MOTOR ON when printing ends. Stops jobs while conveying a paper and printing. Stops the whole system. 1 • The LED lights up in the emergency stop status. • When Roll Winder RW-201 is stopped, the LED blinks. • Press STOP while the LED flickers, the LED turns off and the stop status is canceled. Rotate the winding shaft of Roll Winder RW-201 alone and convey the media. If READY is pressed while the machine is stopped and offline, the alarm beeps for three seconds. For five seconds after the time the alarm stops, JOG is effective. When the machine is stopped and offline, you can operate the conveyer of Roll Winder RW-201 for five seconds from the time READY is pressed and the alarm stops beeping. While pressing JOG, the conveyer operates. Use the function when adjusting the media. If JOG is not pressed within five seconds, or STOP is pressed, newly press READY. 1-9