Konica Minolta AccurioLabel 190 bizhub PRESS C71cf/AccurioLabel 190 Quick Guid - Page 63
Cut the protruded parts of the masking tape from both ends of the joint part.
View all Konica Minolta AccurioLabel 190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Accurio Label 190/bizhub PRESS C71cf $ Stick the joint part of the media from the back side with masking tape. Stick to protrude the masking tape from both ends of the media. 1 2 4 3 % Stick the joint part of the media from the front side with masking tape. Stick to protrude the masking tape from both ends of the media. NOTICE NOTICE Adhere the joint firmly by rubbing the surface of the masking tape to avoid peeling the media during transport. & Cut the protruded parts of the masking tape from both ends of the joint part. 3 ' Take two supplied magnet bars holding the media. When the procedures are completed, convey the media. For details, refer to page 3-19. 3-25
3-25
Accurio Label 190/bizhub PRESS C71cf
3
C
Stick the joint part of the media from the back side with masking tape.
Stick to protrude the masking tape from both ends of the media.
D
Stick the joint part of the media from the front side with masking tape.
Stick to protrude the masking tape from both ends of the media.
NOTICE
NOTICE
Adhere the joint firmly by rubbing the surface of the masking tape to avoid peeling the media during transport.
E
Cut the protruded parts of the masking tape from both ends of the joint part.
F
Take two supplied magnet bars holding the media.
When the procedures are completed, convey the media. For details, refer to page 3-19.
3
2
1
4