Lenovo ThinkPad i Series 1157 ThinkPad 570 On-line User's Guide - Page 125
Appendix B. Using modem commands, Modem commands, Running commands, Command format, AT commands
View all Lenovo ThinkPad i Series 1157 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Appendix B. Using modem commands Modem commands This section provides information on the AT modem commands in case you need to operate your modem from the DOS prompt. Running commands Your modem is in command mode at power-on and is ready to receive and run AT commands. The modem remains in command mode until it makes a connection with a remote modem. Commands might be sent to the modem from an attached terminal or a PC running a communication program. The modem is designed to operate at common DTE speeds ranging from 115.2 Kbps (or 57.6 Kbps) to 300 Kbps. All commands and data must be issued to the modem using one of the valid DTE speeds. Command format All commands (except A/) must begin with the AT prefix, followed by the command letter and ended with the Enter key. Spaces are allowed in the command string to increase command readability but are ignored by the modem during command execution. All commands might be typed in either upper case or lower case, but not mixed. A command issued without parameter is considered as specifying the same command with a parameter "0." Example: ATL[Enter] This command causes your modem to lower its speaker volume. AT commands Command A Function Answers incoming call. Copyright IBM Corp. 1999 119