Lenovo ThinkPad i Series 1157 ThinkPad 570 On-line User's Guide - Page 86
My Computer, Control Panel, Display, Settings, Monitor, Automatically detect Plug & Play, - led
View all Lenovo ThinkPad i Series 1157 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
2 Make sure you are using a D-Sub (Subminiature-D) connector cable. 3 Double-click My Computer, Control Panel, and then Display. The "Display Properties" window appears. 4 Click the Settings tab. 5 Click the Advanced... button. 6 Click the Monitor tab. 7 Make sure the Automatically detect Plug & Play monitors check box is selected. If not, select the check box, and click OK to close the window. Restart the computer; then make sure the plug-and-play feature detects the monitor. 8 If your monitor is still not recognized, click the Change... button. The "Update Device Driver Wizard" window appears. 9 Check if the display driver information in the window is correct. If necessary, install the display driver by following the instructions on the screen. 10 Click the OK button. How can I maximize battery life? To maximize battery life, do the following: Use the battery until the charge is completely depleted (until the battery and power LEDs flash in unison). Recharge the battery completely before using (the battery is fully charged when the AC Adapter is plugged in and the battery LED is green). For a new battery or a battery that you have not used recently: 1. Recharge completely before using (the battery is fully charged when the AC Adapter is plugged in and the battery LED is green). 80 IBM ThinkPad 570 Online Book