Lenovo ThinkPad i Series 1157 ThinkPad 570 On-line User's Guide - Page 126
Specifies ITU/CCITT mode @ 300 bps.
View all Lenovo ThinkPad i Series 1157 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Command A/ B0 B1 B15 B16 Dsn DS=n E0 E1 +++ H0 H1 I0 I1 Function Repeats the preceding command. Note: Do not precede with AT or follow with Enter. Specifies ITU/CCITT mode @ 1200 bps. Specifies bell mode @ 1200 bps. (default) Specifies ITU/CCITT mode @ 300 bps. Specifies bell mode @ 300 bps. (default) Dials a telephone number n (n=0-9, A-D, #, and *) automatically. You can also assign the following: s = L s = P s = T s = W s = V s = , s = @ s = ! s = ; Redials the last number dialed Specifies pulse dial Specifies tone dial (default) Waits for a second dial tone Switches to speakerphone mode Specifies pause Waits for 5 seconds of silence Specifies flash Returns to command mode after dialing Dials one of four stored telephone numbers (n=0-3) in the modem's nonvolatile memory. Disables command echo. Enables command echo. (default) Switches escape characters from data mode to command mode. Hangs up (modem on-hook). (default) Makes busy signal (modem off-hook). Specifies firmware and device ID. Specifies checksum code. 120 IBM ThinkPad 570 Online Book