Lexmark J110 Service Manual - Page 120

4085-001 The power indicator blinks indicating the test is in process. The printer continually runs the same test until canceled from the operator panel (by pressing Return or Stop). Each time the test finishes, the screen is updated with the result. If the test passes, the Pass Count is incremented by 1. However, if the test fails, one of the following failure messages is displayed for approximately 3 seconds and the Fail Count is incremented by 1. • Sync Busy Error • Byte Interrupt Request Error • Strobe Interrupt Request Error • Init Fall Error • Init Busy Error • Init Rise Error • Host Busy Error • RAM Data FF Error • RAM Data AA Error • RAM Data 00 Error • RAM Data 55 Error • DMA Count Error • DMA Address Error • DMA Interrupt Error • DMA Memory Error • DMA Background Error • Clear Init Rise Error • False Init Rise Error • False Init Fall Error • Autofeed Rising Interrupt Error • Clear Autofeed Rise Error • False Autofeed Rise Error • Autofeed Falling Interrupt Error • Clear Autofeed Fall Error Once the maximum pass count or fail count is reached, the test is stopped and the final test results are displayed. Press Return or Stop to exit the test. 3-26 Service Manual