Lexmark J110 Service Manual - Page 35

4085-001 Warning Messages As shown in each of the Status Screens, only one warning message can be displayed at any one time. Once the current warning condition is cleared, the printer automatically shows the next highest priority warning message. If an event occurs which causes a higher priority warning, the higher priority warning message replaces the lower priority warning message. Panel Message Description Available on Status Screen Supplies One or more of the printer supply items has either reached its life warning or is exhausted and/or one of the paper sources is low, empty, or missing. • Ready • Hex Trace Ready • Power Saver • Busy • Resolution Reduced • Waiting Parallel USB The host interface from which the printer is currently drawing and processing data. Those messages which are not designated by a imply the active host interface is a standard interface. Those messages designated by indicate the active interface is connected to the printer by PCI connector x. Those messages designated by indicate the active interface is connected to the printer by a channel y on PCI connector x, or if x=0 on the standard network interface. The copying message is shown when the printer is drawing and processing data originating from an OptraImage™ scanner connected to the printer by a network adapter. Note: There is no Copying host interface. The associated network interface which exists between the printer and network adapter is used for data transmission. • Ready • Hex Trace Ready • Power Saver • Busy • Resolution Reduced • Waiting Diagnostic Information 2-13