Lexmark J110 Service Manual - Page 194
Encoder Disk Feed Roller Assembly Removal, Cover/Operator Panel Removal
View all Lexmark J110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
4085-001 Encoder Disk Feed Roller Assembly Removal 1. Remove the rear cover. Refer to "Rear Cover Removal" on page 4-3. 2. Remove the operator panel cover. Refer to "Operator Panel Cover/Operator Panel Removal" on page 4-5. 3. Remove the exit tray cover. Refer to "Exit Tray Removal" on page 4-5. 4. Remove the left cover. Refer to "Left Cover Removal" on page 4-7. 5. Remove the thrust bracket CBM {A}. 6. Remove the index board assembly. 7. Remove the five backup roller springs {B}. Note orientation of springs before removing. 8. Remove the encoder disk feed roller assembly through the left side of the printer. Note: The index card and the encoder disk feed roller must be replaced as a matching set. See "Index Card Assembly Removal" on page 4-22. Also replace the thrust bracket and the cleaning roller. 4-34 Service Manual