Lexmark J110 Service Manual - Page 199
Exit Shaft with Gear Removal, Station/Ink Waste Tank/Transport Carrier Motor Removal
View all Lexmark J110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
4085-001 Exit Shaft with Gear Removal 1. Remove all covers. 2. Remove carrier and belt. Refer to "Engine Board /Cover Removal" on page 4-14. 3. Remove pump housing, maintenance station, tank, and transport carrier motor. Refer to "Pump Housing/Maintenance Station/Ink Waste Tank/Transport Carrier Motor Removal" on page 4-20. 4. Remove star wheel shaft. Refer to "Star Wheel Shaft Assembly Removal" on page 4-36. 5. Remove paper feed platen. Refer to "Paper Feed Platen Assembly Removal" on page 4-38. 6. Remove the E-clip from the right end of the exit shaft. 7. Move exit shaft to the left, lift and pull to the right to remove the exit shaft gear {A}. Note the orientation of the gear before removal. 8. Remove the exit shaft. Repair Information 4-39