Lexmark J110 Service Manual - Page 48

4085-001 Attendance Message Description Action Change Change A representation of the operator panel when the printer is requesting the operator to change the media installed in one of the input sources. The input source is displayed on line 1 and could be one of the following: Tray 1, Tray 2, MP Feeder. If the requested type matches the type that is installed in the tray and the type is one of the custom types which has not been named, then only the size is displayed. One of the following sizes is left-justified on line 2: Letter, Legal, B2, A4, Executive, Universal, A5, 7 3/4 Envelope, 9 Envelope, 10 Envelope, DL Envelope, C5 Envelope, B5 Envelope, Other Envelope Sources equipped with both size-sensing and media-present hardware: Load the requested size and/or paper type in the source indicated in the message. If media is present in the source and the sensed size is correct, then the printer automatically clears the message and continue the job. If the source already contains the correct size and paper type, then press Go. This situation occurs when the user changes the media in the source, but forgets to change the paper type setting in the menus. Go is ignored if the sensed size is incorrect or media is not present in the tray. Note: The printer assumes the user loaded the correct paper type. The new paper type, paper size, and custom string settings are stored in NVRAM. 2-26 Service Manual