Lexmark J110 Service Manual - Page 29
Printhead Thermal System error, Service Printhead System
View all Lexmark J110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4085-001 Error 934 935 936 938 Symptom Black Printhead Color Printheads Both Printheads TSR measurement indicates a cracked / open TSR or open connection. The debug data identifies the TSR that is open. Black Printhead Color Printheads Both Printheads Failure measuring a TSR value. The debug data identifies the TSR being measured and the type of failure: value too low, or value too high. Service Printhead System Failure zeroing the TSR measurement system. Printhead Thermal System error Action Check the carrier/ printhead contacts. Try replacing both printheads before replacing carrier. Check the carrier cable. If cable is OK, replace carrier. See "Carrier/Cable Retainer Removal" on page 4-48 . If problem remains, replace engine board. See "Engine Board /Cover Removal" on page 4-14 . Try replacing the printheads before replacing carrier. Check the carrier cable. If cable is OK, replace carrier. See "Carrier/Cable Retainer Removal" on page 4-48 . If problem remains, replace engine board. See "Engine Board /Cover Removal" on page 4-14 . Try replacing the printheads before replacing carrier. Check the carrier cable. If cable is OK, replace carrier. See "Carrier/Cable Retainer Removal" on page 4-48 . If problem remains, replace engine board. See "Engine Board /Cover Removal" on page 4-14 . Check the printhead contacts. Overheated. Replace printhead. See "Change Printheads" on page 3-4 . If problem remains, replace carrier assembly. Diagnostic Information 2-7