Lexmark J110 Service Manual - Page 55
Flushing Buffer, CRC Failure
View all Lexmark J110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
4085-001 Attendance Message Description Action 81 Engine Code CRC Failure Flushing Buffer A representation of the operator panel when microcode to be programmed in the engine flash code module has failed a CRC check. Press Go to clear the message. The microcode data is discarded and must be re-transmitted from the host computer. A representation of the operator panel when the printer is flushing a print job. The interpreter is flushing the currently active job until an End Of Job is found or until no data has been received on the active host interface for 5 seconds. This message is commonly displayed when the Lexgear interpreter receives a print job with data corruption. It can also be displayed when a print job is sent to the printer in PostScript or PCL 5 emulations. No buttons are active while this message is displayed. Diagnostic Information 2-33