Lexmark J110 Service Manual - Page 173
Ink Levels and Temperature Sensor with Bracket Removal, Rear Cover Removal on,
![]() |
View all Lexmark J110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
4085-001 Ink Levels and Temperature Sensor with Bracket Removal 1. Remove the rear cover. Refer to "Rear Cover Removal" on page 4-3. 2. Remove the operator panel cover. Refer to "Operator Panel Cover/Operator Panel Removal" on page 4-5. 3. Disconnect the ink level and temperature sensor connector (J12) on the engine board. Note the wire routing. 4. Remove the right cover. 5. Remove the screw {A} from the sensor bracket. 6. Remove the sensor and bracket {B}. Repair Information 4-13
![](/manual_guide/products/lexmark-j110-service-manual-1c3d013/173.png)
Repair Information
4-13
4085-001
Ink Levels and Temperature Sensor with Bracket
Removal
1.
Remove the rear cover. Refer to
“Rear Cover Removal” on
page 4-3
.
2.
Remove the operator panel cover. Refer to
“Operator Panel
Cover/Operator Panel Removal” on page 4-5
.
3.
Disconnect the ink level and temperature sensor connector
(J12) on the engine board. Note the wire routing.
4.
Remove the right cover.
5.
Remove the screw {A} from the sensor bracket.
6.
Remove the sensor and bracket {B}.