Lexmark J110 Service Manual - Page 38
to the Busy/Waiting Menu, Waiting Menu group.
View all Lexmark J110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
4085-001 Status Message Cancelling Job Cleaning Printheads Status Action Appears after the Cancel Job operation is selected. This message is displayed until the cancel operation is complete. Press Menu> or Menu< to access the Busy/ Waiting Menu group. The printer is online while the Busy/Waiting Menu group is active. Note: Menu Lockout does not prevent access to the Busy/Waiting Menu group. If no function in the Busy/Waiting group is available, the Menus Disabled message is temporarily shown when Menu> or Menu< is pressed. Appears after Cleaning Printheads is selected. No buttons are active while this message is displayed. Status Message Printer Calibrating Status Action A representation of the operator panel when the printer is initializing the mechanical subsystems at POR (Power-On Reset), following the "Performing Self Test" message or during printing. The duration of this message varies depending on the level in the lower PerfectFinish vessel. The Stop button is available; however, the printer will post "Not Ready." The printer will not post "Ready" until Go is pressed. Press Menu> or Menu< to access the Busy/ Waiting Menu group for menu details. Typically this menu is used to access the Reset functions of view the printer Supplies status. The printer is online while the Busy/Waiting Menu group is active. 2-16 Service Manual