Lexmark J110 Service Manual - Page 208
Backup Roller Spring Removal, Carrier/Cable Retainer Removal
View all Lexmark J110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
4085-001 Backup Roller Spring Removal 1. Lift the front door on the printer. 2. Press the coil on the backup roller spring to center and remove. Note the position of the spring before removing. Carrier/Cable Retainer Removal 1. Remove all covers. 2. Remove the engine board cover. 3. Disconnect carrier cables from the engine board. 4. Remove the carrier guide shaft from the carrier. 5. Unlatch the cable restraint, disconnect carrier cables from the rear of the carrier and remove. 6. Depress the retainer cable clip, move the cable to the right and remove. 4-48 Service Manual
4-48
Service Manual
4085-001
Backup Roller Spring Removal
1.
Lift the front door on the printer.
2.
Press the coil on the backup roller spring to center and remove.
Note the position of the spring before removing.
Carrier/Cable Retainer Removal
1.
Remove all covers.
2.
Remove the engine board cover.
3.
Disconnect carrier cables from the engine board.
4.
Remove the carrier guide shaft from the carrier.
5.
Unlatch the cable restraint, disconnect carrier cables from the
rear of the carrier and remove.
6.
Depress the retainer cable clip, move the cable to the right and
remove.