Lexmark J110 Service Manual - Page 189
Cam Engine Motor with Gear Removal, Remove the two screws {A} from the motor.
View all Lexmark J110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
4085-001 Cam Engine Motor with Gear Removal 1. Remove the rear cover. Refer to "Rear Cover Removal" on page 4-3. 2. Remove the exit tray cover. Refer to "Exit Tray Removal" on page 4-5. 3. Remove the left cover. Refer to "Left Cover Removal" on page 4-7. 4. Disconnect the cam engine motor connector (J8) from the engine board. 5. Remove the two screws {A} from the motor. 6. Remove the motor through the front of the printer. Note the routing of the wires. Repair Information 4-29
Repair Information
4-29
4085-001
Cam Engine Motor with Gear Removal
1.
Remove the rear cover. Refer to
“Rear Cover Removal” on
page 4-3
.
2.
Remove the exit tray cover. Refer to
“Exit Tray Removal” on
page 4-5
.
3.
Remove the left cover. Refer to
“Left Cover Removal” on
page 4-7
.
4.
Disconnect the cam engine motor connector (J8) from the
engine board.
5.
Remove the two screws {A} from the motor.
6.
Remove the motor through the front of the printer. Note the
routing of the wires.