Netgear AC779S User Guide - Page 14
Remove the Battery, Charge Using the AC Adapter
View all Netgear AC779S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3. Replace the battery cover. Remove the Battery Follow these instructions to remove your device's battery. Always power the device off before removing the battery. 1. At the antenna connector shown below, lift the raised edge of the battery cover to remove it. 2. Remove the battery. 3. Replace the battery cover. Charge the Battery You need to recharge your device's battery periodically. You can continue using your device while it is charging. The faster method is to connect your device to the AC charger. Alternatively, you can connect your device to your computer, although this charges more slowly. Charge Using the AC Adapter 1. Insert the larger (Type A) end of the micro-USB cable into the AC charger. Get Started 9
Get Started
9
3.
Replace the battery cover.
Remove the Battery
Follow these instructions to remove your device's battery. Always power the device off before
removing the battery.
1.
At the antenna connector shown below, lift the raised edge of the battery cover to remove it.
2.
Remove the battery.
3.
Replace the battery cover.
Charge the Battery
You need to recharge your device’s battery periodically. You can continue using your device while it
is charging.
The faster method is to connect your device to the AC charger. Alternatively, you can connect your
device to your computer, although this charges more slowly.
Charge Using the AC Adapter
1.
Insert the larger (Type A) end of the micro-USB cable into the AC charger.