Netgear AC779S User Guide - Page 56
DMZ, DNS 1, DNS Mode
View all Netgear AC779S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Item LAN Description IP Address The routing hardware's IP address on the LAN. Netmask The routing hardware's internal LAN subnet mask. USB IP Address The IP address assigned to the hotspot by the computer to which it is tethered. VPN Passthrough VPN connections are enabled (On) or disabled (Off). See Enable VPN Passthrough. DHCP Server This field enables (On) or disables (Off) DHCP. See DHCP. DHCP IP Range This specifies the starting and ending address of the range of IP addresses available for your device to dynamically (that is, not permanently) assign to computers connected to it. See DHCP. DHCP lease time This is the amount of time, in minutes, a computer can use its assigned IP address before it is required to renew the lease. After this time is up, the computer is automatically assigned a new dynamic IP address. See DHCP. DNS mode Enter a number between 2 and 10080. This specifies how the DNS servers (that the DHCP clients are to communicate with) are obtained. l Manual - The routing hardware assigns DHCP clients the DNS servers specified in the DNS 1 and DNS 2 fields Use this option to access a DNS server that provides customized addressing or if you have a local DNS server on your network. Note: The DNS 1 and DNS 2 fields appear only if DNS Mode is Manual. DNS 1 DNS 2 DMZ l Auto - The DNS server specified by your Internet service provider is used. Address of a manual DNS server. (This field appears only if DNS Mode is Manual.) Address of a manual DNS server. (This field appears only if DNS Mode is Manual.) DMZ Enabled Enable / disable demilitarized zone. DMZ Address If DMZ is enabled, this is the IP address of a single computer used to receive all unsolicited incoming connections. DMZ You can select one computer to receive all unsolicited incoming connections. Settings 51