Netgear MBRN3000 MBRN3000 User Manual - Page 34

Field, Description, Table 4., Router Status Fields, Continued - access point

Get Netgear MBRN3000 - 3G/4G Mobile Broadband Wireless-N Router PDF manuals and user guides
UPC - 606449068054
View all Netgear MBRN3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Mobile Broadband Wireless-N Router MBRN3000 Table 4. Router Status Fields (Continued) Field Description WAN Port Connection Status The status of the Internet connection. IP Address The IP address used by the modem. If no address is shown, the router cannot connect to the Internet. Protocol The protocol for the Internet connection, which is PPP (Point-to-Point). IP Subnet Mask The IP subnet mask used by the router's USB port. Gateway IP Address The IP address used by the router. Domain Name Server The DNS server IP addresses used by the router. These addresses are usually obtained dynamically from the ISP. LAN Port MAC Address The Ethernet MAC address used by the router's LAN port. IP Address DHCP The LAN port IP address. The default is 192.168.0.1. • Off: The router will not assign IP addresses to PCs on the LAN. • On: The router assigns IP addresses to PCs on the LAN. IP Subnet Mask The LAN port IP subnet mask. The default is 255.255.255.0. Wireless Port (See "Manually Configuring Your Wireless Settings" on page 15. Name (SSID) Region Channel The service set ID, also known as the wireless network name. The country where the unit is set up for use. The current channel, which determines the operating frequency. Wireless AP Indicates if the access point feature is disabled or not. If not enabled, the Wireless LED on the front panel will be off. Broadcast Name Indicates if the router is configured to broadcast its SSID. 34 | Chapter 4: Managing Your Network

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
34
|
Chapter 4:
Managing Your Network
Mobile Broadband Wireless-N Router MBRN3000
WAN Port
Connection Status
The status of the Internet connection.
IP Address
The IP address used by the modem. If no address is shown,
the router cannot connect to the Internet.
Protocol
The protocol for the Internet connection, which is PPP
(Point-to-Point).
IP Subnet Mask
The IP subnet mask used by the router’s USB port.
Gateway IP Address
The IP address used by the router.
Domain Name
Server
The DNS server IP addresses used by the router. These
addresses are usually obtained dynamically from the ISP.
LAN Port
MAC Address
The Ethernet MAC address used by the router’s LAN port.
IP Address
The LAN port IP address. The default is 192.168.0.1.
DHCP
•
Off:
The router will not assign IP addresses to PCs on the
LAN.
•
On:
The router assigns IP addresses to PCs on the LAN.
IP Subnet Mask
The LAN port IP subnet mask. The default is 255.255.255.0.
Wireless Port
(See
“Manually
Configuring Your
Wireless Settings”
on page
15.
Name (SSID)
The service set ID, also known as the wireless network name.
Region
The country where the unit is set up for use.
Channel
The current channel, which determines the operating
frequency.
Wireless AP
Indicates if the access point feature is disabled or not. If not
enabled, the Wireless LED on the front panel will be off.
Broadcast Name
Indicates if the router is configured to broadcast its SSID.
Table 4.
Router Status Fields
(Continued)
Field
Description