Netgear STM300 STM 150-300-600 Reference Manual (PDF) - Page 61

ProSecure Web/Email Security Threat Management (STM) Appliance Internet. The settings on the HTTP Proxy screen affect Web category filtering, distributed spam analysis, and software updates. To configure the HTTP proxy: 1. Select Global Settings > HTTP Proxy from the menu. The HTTP Proxy screen displays: Figure 37. 2. Select the check box and complete the fields as explained in the following table: Table 17. HTTP Proxy Settings Setting Description (or Subfield and Description) HTTPS Proxy Settings Use a Proxy Server to If computers on the network connect to the Internet via a proxy server, select the Connect to the Internet Use a Proxy Server to Connect to the Internet check box to specify and enable a proxy server. Enter the following settings: Proxy Server The IP address and port number of the proxy server. User Name Password The user name for proxy server authentication. The password for proxy server authentication. 3. Click Apply to save your settings. About Users with Administrative and Guest Privileges There are two predefined user types that can access the STM's Web Management Interface: • Administrator. A user who has full access and the capacity to change the STM configuration (that is, read/write access). The default user name for an administrator is admin, and the default password for an administrator is password. Chapter 3. Performing Network and System Management | 61