Netgear STM300 STM 150-300-600 Reference Manual (PDF) - Page 66
Administration > SNMP, To enable SNMP and to con the SNMP settings
UPC - 606449062458
View all Netgear STM300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
ProSecure Web/Email Security Threat Management (STM) Appliance To enable SNMP and to configure the SNMP settings: 1. Select Administration > SNMP from the menu. The SNMP screen displays: Figure 40. 2. Select the radio buttons and complete the fields as explained in the following table: Table 20. SNMP Settings Setting SNMP Settings Do You Want to Enable SNMP? Description (or Subfield and Description) Select one of the following radio buttons: • Yes. Enable SNMP. • No. Disable SNMP. This is the default setting. Read Community The community string to allow an SNMP manager access to the MIB objects of the STM for the purpose of reading only. The default setting is public. Set Community The community string to allow an SNMP manager access to the MIB objects of the STM for the purpose of reading and writing. The default setting is private. 66 | Chapter 3. Performing Network and System Management