Netgear STM300 STM 150-300-600 Reference Manual (PDF) - Page 73

ProSecure Web/Email Security Threat Management (STM) Appliance Table 21. Software Update Settings (Continued) Setting Description (or Subfield and Description) Update Settings Update From Select one of the following radio buttons: • Default Update Server. The scan engine and signatures are updated from the NETGEAR default update server. • Another Update Server. The scan engine and signatures are updated from a server that you specify by entering the server IP address or host name in the Server Address field. Server Address The update server IP address or host name. Update Component Make one of the following selections from the drop-down list: • Update Signature Patterns only. Only the (signature) pattern file is updated. The software, scan engine, and OS are not updated. • Update all Software and Signature Patterns. The software, scan engine, (signature) pattern file, and OS are updated. This is the default setting. Update Frequency Make one of the following selections: • Weekly. From the drop-down lists, specify the day, hour, and minutes that the update should occur. • Daily. From the drop-down lists, specify the hour and minutes that the update should occur. • Every. From the drop-down list, specify the frequency with which the update should occur. 3. Click Apply to save your settings. Performing a Manual Update If you want to immediately check for and download available updates, perform a manual update: 1. Select Administration > Software Update from the menu. The Software Update screen displays (see the previous figure). 2. At the bottom of the screen, click Update Now. The STM contacts the update server and checks for available updates. If updates are available, the Update Progress screen displays to show the progress of the update: Figure 43. Chapter 3. Performing Network and System Management | 73