Netgear WAC124 User Manual For Firmware version less than 1.0.4.2 - Page 116
Router mode: Disable the DHCP server, Login, ADVANCED > Setup > LAN Setup
View all Netgear WAC124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
AC2000 802.11ac Wireless Access Point/Router WAC124 Router mode: Disable the DHCP server If the access point/router is in router mode, you can use another device on your network as the DHCP server or specify the network settings of all your computers. Note: If you disable the DHCP server and do not specify another DHCP server or no other DHCP server is available on your network, you must set your computer IP addresses manually so that they can access the access point/router. To disable the DHCP server: 1. Open a web browser from a computer or mobile device that is connected to the access point/router network. 2. Enter http://www.routerlogin.net in the address field. If you are not connected to the access point/router network but to the same network as the access point/router, enter the IP address that is assigned to the access point/router. If you do not know the IP address, see Find the IP address of the access point/router on page 29. The Sign-In page displays. You are prompted to sign in with your NETGEAR account. If the access point/router is not connected to the Internet, you are prompted to sign in with the local login credentials (see Log in to the access point/router when it is not connected to the Internet on page 28). 3. Click the Login button. The NETGEAR Account Login page displays. 4. Enter your registered email address and password and click the LOG IN button. The BASIC Home page displays. 5. Select ADVANCED > Setup > LAN Setup. The LAN Setup page displays. 6. Clear the Use Router as DHCP Server check box. 7. Click the Apply button. Your settings are saved. Manage the Network Settings 116 User Manual