Netgear WAC124 User Manual For Firmware version less than 1.0.4.2 - Page 143
View, send, or clear the logs
View all Netgear WAC124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
AC2000 802.11ac Wireless Access Point/Router WAC124 The BASIC Home page displays. 5. Select ADVANCED > Administration > Logs. The Logs page displays. 6. Select the check boxes that correspond to the activities that you want to be logged. By default, all check boxes are selected, and the following activities are logged: • Attempted access to allowed sites • Attempted access to blocked sites and services • Connections to the local browser interface of the access point/router • Access point/router operations such as startup, getting the time, and so on • Known DoS attacks and port scans • Port forwarding and port triggering • WiFi access • ReadySHARE access • VPN service 7. Clear the check boxes that correspond to the activities that you do not want to be logged. 8. Click the Apply button. Your settings are saved. View, send, or clear the logs In addition to viewing the logs, you can send them by email, and clear them. To view, send, or clear the logs: 1. Open a web browser from a computer or mobile device that is connected to the access point/router network. 2. Enter http://www.routerlogin.net in the address field. If you are not connected to the access point/router network but to the same network as the access point/router, enter the IP address that is assigned to the access point/router. If you do not know the IP address, see Find the IP address of the access point/router on page 29. The Sign-In page displays. You are prompted to sign in with your NETGEAR account. Maintain and Monitor the Access 143 Point/Router User Manual