Netgear WAC124 User Manual For Firmware version less than 1.0.4.2 - Page 174
Manage access to a USB storage device
View all Netgear WAC124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
AC2000 802.11ac Wireless Access Point/Router WAC124 14. When prompted, select the Registered User radio button. 15. Enter the same credentials that you use for local login to the access point/router. If you did not yet change the default password for local login, enter admin as the user name and password as the password. 16. Click the Connect button. When the setup is complete, the Mac automatically schedules a full backup. You can back up immediately. Manage access to a USB storage device You can specify the device name, workgroups, and network folders for a USB storage device that is connected to the USB port on the access point/router. To specify access to the USB storage device: 1. Open a web browser from a computer or mobile device that is connected to the access point/router network. 2. Enter http://www.routerlogin.net in the address field. If you are not connected to the access point/router network but to the same network as the access point/router, enter the IP address that is assigned to the access point/router. If you do not know the IP address, see Find the IP address of the access point/router on page 29. The Sign-In page displays. You are prompted to sign in with your NETGEAR account. If the access point/router is not connected to the Internet, you are prompted to sign in with the local login credentials (see Log in to the access point/router when it is not connected to the Internet on page 28). 3. Click the Login button. The NETGEAR Account Login page displays. 4. Enter your registered email address and password and click the LOG IN button. The BASIC Home page displays. 5. Select ADVANCED > USB Storage > ReadySHARE. The USB Storage (Advanced Settings) page displays. 6. To specify a name that is used to access the USB storage device that is connected to the access point/router, in the Network/Device Name field, enter a name. By default, the name is readyshare. Share a USB Storage Device 174 Attached to the Access Point/Router User Manual