Netgear WAC124 User Manual For Firmware version less than 1.0.4.2 - Page 85
Router mode: Specify keywords and domains to block Internet sites
View all Netgear WAC124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
AC2000 802.11ac Wireless Access Point/Router WAC124 7. To add a device to the blocked list, do the following: a. Click the Add button. The Add Blocked Device page displays. b. Enter the MAC address and device name for the device that you want to block. c. On the Add Blocked Device page, click the Apply button. The device is added to the blocked list on the Access Control page. 8. To remove a device from the blocked list, do the following: a. Select the check box for the device. b. Click the Delete button. The device is removed from the blocked list. 9. Click the Apply button. Your settings are saved. Router mode: Specify keywords and domains to block Internet sites If the access point/router is in router mode, you can block keywords and domains (websites) to prevent certain types of HTTP traffic from accessing your network. By default, keyword blocking is disabled and no domains are blocked. Note: The information in this section and subsections does not apply if the access point/router is in access point mode. Router mode: Set up keyword and domain blocking You can set up blocking of specific keywords and domains to occur continuously or according to a schedule. To set up keyword and domain blocking: 1. Open a web browser from a computer or mobile device that is connected to the access point/router network. 2. Enter http://www.routerlogin.net in the address field. If you are not connected to the access point/router network but to the same network as the access point/router, enter the IP address that is assigned to the access Manage the Firewall and 85 Security User Manual