Netgear WAC124 User Manual For Firmware version less than 1.0.4.2 - Page 90

AC2000 802.11ac Wireless Access Point/Router WAC124 your LAN. The access point/router lists many default services and applications that you can use in blocking rules. You can also add a service blocking rule for a custom service or application. Note: The information in this section and subsections does not apply if the access point/router is in access point mode. Router mode: Add a service blocking rule for a predefined service or application The access point/router lists many predefined services and applications that you can use in outbound rules. You can add a service blocking rule to prevent access to a specific service or application on the Internet. To add a service blocking rule: 1. Open a web browser from a computer or mobile device that is connected to the access point/router network. 2. Enter http://www.routerlogin.net in the address field. If you are not connected to the access point/router network but to the same network as the access point/router, enter the IP address that is assigned to the access point/router. If you do not know the IP address, see Find the IP address of the access point/router on page 29. The Sign-In page displays. You are prompted to sign in with your NETGEAR account. If the access point/router is not connected to the Internet, you are prompted to sign in with the local login credentials (see Log in to the access point/router when it is not connected to the Internet on page 28). 3. Click the Login button. The NETGEAR Account Login page displays. 4. Enter your registered email address and password and click the LOG IN button. The BASIC Home page displays. 5. Select ADVANCED > Security > Block Services. The Block Services page displays. 6. In the Services Blocking section, specify how the access point/router applies outbound rules: • Per Schedule. Use service blocking according to a schedule that you set. Manage the Firewall and 90 Security User Manual