Netgear WAC124 User Manual For Firmware version less than 1.0.4.2 - Page 22
About router mode
View all Netgear WAC124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
AC2000 802.11ac Wireless Access Point/Router WAC124 The Power LED starts blinking yellow and the configuration is reset to factory default settings. When the reset is complete, the access point/router reboots and connects to the NETGEAR server to detect if new firmware is available. The entire process of resetting, rebooting, and detecting firmware takes about three minutes. Caution: After the access point/router reboots, wait at least one more minute. If you log in too early, the access point/router might not yet have completed the firmware detection process. 3. Launch a web browser and enter http://www.routerlogin.net in the address field. The Sign-In page displays. 4. If the Sign-In page now displays the ! A new firmware upgrade is available. Click here to get it. button, do the following: a. Click the ! A new firmware upgrade is available. Click here to get it. button. The access point/router finds the new firmware information and displays a message asking if you want to download and install it. b. Click the Yes button. The access point/router locates and downloads the firmware and begins the update. The Firmware Upgrade Assistant page displays while the firmware of the access point/router is being updated. During the update, do not turn off the power or press the Reset button. The update process takes about three minutes, after which the access point/router restarts. c. If the Sign-In page does not display, launch a web browser and enter http://www.routerlogin.net in the address field. 5. Continue with Step 7 of Connect the access point/router to your existing router and log in for the first time on page 17 and complete the initial log-in process. About router mode By default, the access point/router is in access point mode and functions as a WiFi access point and LAN switch for Internet access. After initial log-in, you can change the mode of the access point/router to router mode, connect the access point/router directly to an Internet modem such as a cable or DSL modem, and log back in to the access point/router. Install and Access the Access 22 Point/Router in Your Network User Manual