Netgear WAC124 User Manual For Firmware version less than 1.0.4.2 - Page 92

AC2000 802.11ac Wireless Access Point/Router WAC124 To add service blocking rule for a custom service or application: 1. Find out which protocol and port number or range of numbers the service or application uses. You can usually find this information by contacting the publisher of the service or application or through online user or news groups. 2. Open a web browser from a computer or mobile device that is connected to the access point/router network. 3. Enter http://www.routerlogin.net in the address field. If you are not connected to the access point/router network but to the same network as the access point/router, enter the IP address that is assigned to the access point/router. If you do not know the IP address, see Find the IP address of the access point/router on page 29. The Sign-In page displays. You are prompted to sign in with your NETGEAR account. If the access point/router is not connected to the Internet, you are prompted to sign in with the local login credentials (see Log in to the access point/router when it is not connected to the Internet on page 28). 4. Click the Login button. The NETGEAR Account Login page displays. 5. Enter your registered email address and password and click the LOG IN button. The BASIC Home page displays. 6. Select ADVANCED > Security > Block Services. The Block Services page displays. 7. The first time that you add an outbound firewall rule, in the Services Blocking section, specify how the access point/router applies outbound rules: • Per Schedule. Use keyword blocking according to a schedule that you set. For more information, see Router mode: Set up a schedule for blocking on page 95. • Always. Use keyword blocking continuously. 8. Click the Add button. The Add Services Blocking page displays. 9. From the Service Type menu, select User Defined. Manage the Firewall and 92 Security User Manual