Netgear WAC124 User Manual For Firmware version less than 1.0.4.2 - Page 155
Router mode: Monitor and meter Internet traffic
View all Netgear WAC124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
AC2000 802.11ac Wireless Access Point/Router WAC124 (Continued) Field Description Local IP Address The IP address that is assigned to the device when it joined the access point/router network. This address can change when a device is disconnected and rejoins the network. Remote IP Address The IP address of the device at the other side of the VPN tunnel. Connection Time The time that elapsed since the device connected to the access point/router. 6. To refresh the information onscreen, click the Refresh button. The information onscreen is updated. Router mode: Monitor and meter Internet traffic If the access point/router is in router mode, you can enable traffic metering to monitor the volume of Internet traffic that passes through the access point/router's WAN port. With the traffic meter utility, you can set limits for traffic volume, set a monthly limit, and get a live update of traffic usage. Note: The information in this section and subsections does not apply if the access point/router is in access point mode. Router mode: Start the traffic meter without traffic restrictions You can monitor the traffic volume without setting a limit on the volume or connection time. To start or restart the traffic meter without configuring traffic volume or connection time restrictions: 1. Open a web browser from a computer or mobile device that is connected to the access point/router network. 2. Enter http://www.routerlogin.net in the address field. If you are not connected to the access point/router network but to the same network as the access point/router, enter the IP address that is assigned to the access Maintain and Monitor the Access 155 Point/Router User Manual