Netgear WAC124 User Manual For Firmware version less than 1.0.4.2 - Page 201
Router mode: Install OpenVPN client software on a remote client
View all Netgear WAC124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
AC2000 802.11ac Wireless Access Point/Router WAC124 We recommend that you use the default TUN mode and TAP mode settings. However, if you know that you need other settings, you can change the TUN mode and TAP mode settings by doing the following: • To change the TUN mode service type, select the UDP or TCP radio button • To change the TUN mode service port, type the port number that you want to use in the field. The default port number is 12973. • To change the TAP mode service type, select the UDP or TCP radio button. • To change the TAP mode service port, type the port number that you want to use in the field. The default port number is 12974. 7. Specify how VPN client connections can be used on the access point/router by selecting one of the following radio buttons: • All sites on the Internet & Home Network. The VPN client can access the Internet and all sites and services on the access point/router network, that is, behind the access point/router firewall. Accessing the Internet remotely through a VPN connection might be slower than accessing the Internet directly. • Home Network only. The VPN client can access all sites and services on the access point/router network, that is, behind the access point/router firewall, but cannot access the Internet. • Auto. The access point/router automatically uses the VPN service only for necessary access, that is, the access point/router allows access to sites and services that would not be accessible without a VPN connection. This is the default selection. However, if some sites or services are not accessible to the VPN client, or if a user cannot access some sites on the Internet, select another radio button. 8. Click the Apply button. Your settings are saved. OpenVPN service is enabled on theaccess point/router. Users must install and set up OpenVPN software on their computer or mobile device before they can establish a VPN connection to the access point/router. Router mode: Install OpenVPN client software on a remote client To establish a VPN connection to the access point/router using OpenVPN software, a remote client must install OpenVPN client software on their computer or mobile device. Router Mode: Set up VPN 201 Connections with OpenVPN User Manual