Netgear WAC124 User Manual For Firmware version less than 1.0.4.2 - Page 3
Contents - local login
View all Netgear WAC124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Contents Chapter 1 Hardware Overview of the Access Point/Router Top panel with LEDs 12 Back panel with ports, buttons, and a power connector 13 Position the antennas for best WiFi performance 14 Access point/router label 14 Chapter 2 Install and Access the Access Point/Router in Your Network Connect the access point/router to your existing router and log in for the first time 17 Update the access point/router firmware if you cannot complete the initial log-in process 21 About router mode 22 Use the access point/router in router mode 23 Log in to the access point/router when it is connected to the Internet 26 Log in to the access point/router when it is not connected to the Internet 28 Use the NETGEAR Insight mobile app to discover the access point/router 29 Find the IP address of the access point/router 29 Change the language 31 Change the local login admin password 32 Set up password recovery for the local login admin user name...33 Connect a wired or WiFi device to the access point/router's network after installation 34 Connect to the access point/router through an Ethernet cable 34 Use Wi-Fi Protected Setup to join the WiFi network of the access point/router 35 Manually join the WiFi network of the access point/router......36 Chapter 3 Specify the Access Point/Router Internet Settings Manually Use the Internet Setup Wizard 38 Access point mode: Specify a fixed LAN IP address 39 3