Oki X400 X400 Programming Command Manual - Page 10
Rotated Field, Commad Default Settings
View all Oki X400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
ROTATED FIELD The printers can rotate each print field in 90o increments using the Rotate command. There are two variations of this command. % - The field rotates, but the base reference point for the field remains the same. R - The field and the base reference point rotate. The following data stream will rotate the print field but will not change the base reference point of the field: A%1V800H200L0202WB1EQ1Z The following data stream will rotate both the field and the base reference point for that field: AR%1V800H200L0202WB1EQ1Z Base Ref Point H=200 Base Ref Point V=200 V=800 Label Feed Direction H=100 "%1" New Base Ref "R" Point COMMAD DEFAULT SETTINGS There are some types of commands that must have a value specified before a label can be printed. If the data stream does not contain these commands, a "default" value is assumed. The commands and the default values are: 8