Oki X400 X400 Programming Command Manual - Page 22
Base Reference Point
View all Oki X400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Base Reference Point Command Structure A3H-aaaaVbbbb - = This character is optional. When present, it specifies that the horizontal offset is the negative direction. If it is left out the offset direction is positive. aaaa = bbbb = Horizontal Print Offset (-832 to 0832) Vertical Print Offset (1 to 9999) Example: A3H100V50 Placement: Preceding all images that are based on the new base reference point. Default: Current V and H offset settings in the printer configuration. Command Function To establish a new reference point for the current label. The base reference point is the top left corner or "origin" from where all print position commands are based. This command may be very helpful when using labels less than four inch wide to place images on the printable label surface. It may also be used to move images past preprinted fields on a label. Input to Printer Printer Output AL0101 H25V25WB0NORMAL REFERENCE POINT A3H300V75 H25V50WB0NEW REFERENCE POINT Q1Z 20