Oki X400 X400 Programming Command Manual - Page 62
Repeat Label
![]() |
View all Oki X400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Repeat Label Command Structure C Example: See above Placement: Must be placed immediately after A and immediately before Z in its own data stream. Default: None Command Function To print duplicate of the last label printed. Input to Printer Printer Output A C Z A duplicate of the previous label will be printed. Special Note This command will have no effect if the power to the printer was cycled off and back on since printing the previous label. 60
![](/manual_guide/products/oki-data-x400-x400-programming-command-manual-82e8f1d/62.png)
Repeat Label
Command Structure
<ESC>C
Example:
See above
Placement: Must be placed immediately after <ESC>A and immediately
before <ESC>Z in its own data stream.
Default:
None
Command Function
To print duplicate of the last label printed.
Input to Printer
<ESC>A
<ESC>C
<ESC>Z
Printer Output
A duplicate of the previous label will be printed.
Special Note
This command will have no effect if the power to the printer was cycled off and
back on since printing the previous label.
60