Oki X400 X400 Programming Command Manual - Page 65
Reverse Image
View all Oki X400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Reverse Image Command Structure (aaaa,bbbb aaaa = Horizontal length in dots of reverse image area 1 to 832. bbbb = Vertical height in dots of reverse image area 1 to 10150 Example: (100,50 Placement: This command must be preceded by all other data and be placed just before Q. Default: None Command Function To reverse an image area from black to white and vice versa. Use the Print Position commands (H and V) to locate the top left corner of the Reverse image data. Input to Printer A H50V120L0202WB1REVERSE H250V300L0202WB1HALF H40V110(370,100 H240V290(220,47 Q1Z Printer Output Special Notes 1. A reverse image area is affected by the rotate commands. Therefore, always assume the printer is in the normal print orientation when designing and sending the Reverse Image command. 2. If using reverse images with the form overlay, place this command before the Form Overlay command in the data stream. 63