Oki X400 X400 Programming Command Manual - Page 56
Media Size
View all Oki X400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Media Size Command Structure A1aaaabbbb aaaa = Vertical Media Size in dots (0 to Vmax). bbbb = Horizontal Media Size in dots (0 to Hmax). Example: A132000832 Placement: Separate data stream to the printer. Default: A136000832 Command Function To set the size of the media. Input to Printer Printer Output A A108320812 Z There is no printer output resulting from this command. It is used to auto -matically adjust the offset values for the size of label being used. Special Notes 1. The Base Reference point is always on the right (looking at the front of the printer) side of the print head. This command adjusts the Base Reference Point to correspond with the right edge of the loaded media. 2. If the label size is changed, then this command must be respecified to centralize the print image on the label. 3. All eight variables ("aaaa" and "bbbb") must be included in this command. 54