Oki X400 X400 Programming Command Manual - Page 61
Print Speed
![]() |
View all Oki X400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Print Speed Command Structure CSa a = Designates the speed selection. 1 = 1 ips (25 mm/s) 2 = 2 ips (50 mm/s) 3 = 3 ips (75 mm/s) 4 = 4 ips (100 mm/s) Example: CS3 Placement: Must be placed immediately after A and immediately before Z in its own data stream. Default: As previously set in the printer configuration. Command Function To specify a unique print speed through software for a particular label. This allows flexibility in finding the best performance and quality for the particular label format, media, and ribbon. All subsequent labels will print at this speed unless the speed is changed with this command. Input to Printer A CS3 Z Printer Output There is no printer output for this command. It sets the print speed of the printer to 3 inches per seconds. Special Notes This becomes the new setting in the printer configuration for all subsequent print jobs, unless changed. The settings is stored in non-volatile memory and is not affected by cycling the power. 59
![](/manual_guide/products/oki-data-x400-x400-programming-command-manual-82e8f1d/61.png)