Oki X400 X400 Programming Command Manual - Page 93

Label Tear-Off

Get Oki X400 PDF manuals and user guides View all Oki X400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

Label Tear-Off Command Structure CBabb a = bb = + to move the print line down from the top edge of the label - to move the print line toward the top of the label. Distance moved in millimeters (00 to 25) Example: CB+03 Placement: This command should be sent in a separate data stream. Default: Last valid setting. Command Function To adjust the location of the first print line on the label. Input to Printer Printer Output A CI2CB+03 Z There is no printer output for this command. The first print line on the next printed label will be adjusted after the receipt of this command. Special Notes 1. The effects of this command are cumulative, i.e. If an CB+06 command is followed by an CB-02, the resulting change in position is +4mm. 2. The maximum range for the value stored in the printer is 98 mm. Any commands received that causes the value to exceed 00 or 98 will result in a setting of 00 or 98 respectively. Stop code, No other commands can be included in the data stream. 3. The value is stored in non-volatile memory and will be remained until it is modified by another valid CBabb command, even if power is removed from the printer. 4. The current setting is printed out on the "Pitch Offset" line on the test label. 5. Separate offset settings are stored for gap and eye-mark sensing. 91

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
Label Tear-Off
Command Structure
<ESC>CBabb
a
=
+ to move the print line down from the top edge of the label
- to move the print line toward the top of the label.
bb
=
Distance moved in millimeters (00 to 25)
Example:
<ESC>CB+03
Placement: This command should be sent in a separate data stream.
Default:
Last valid setting.
Command Function
To adjust the location of the first print line on the label.
Input to Printer
<ESC>A
<ESC>CI2<ESC>CB+03
<ESC>Z
Printer Output
There is no printer output for this command. The first print line on the next
printed label will be adjusted after the receipt of this command.
Special Notes
1.
The effects of this command are cumulative, i.e. If an <ESC>CB+06 command
is followed by an <ESC>CB-02, the resulting change in position is +4mm.
2.
The maximum range for the value stored in the printer is 98 mm. Any
commands received that causes the value to exceed 00 or 98 will result in a
setting of 00 or 98 respectively.
Stop code, No other commands can be included in the data stream.
3.
The value is stored in non-volatile memory and will be remained until it is
modified by another valid <ESC>CBabb command, even if power is removed
from the printer.
4.
The current setting is printed out on the “Pitch Offset” line on the test label.
5.
Separate offset settings are stored for gap and eye-mark sensing.
91