Oki X400 X400 Programming Command Manual - Page 37
Peeler Command
![]() |
View all Oki X400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Peeler Command Command Structure CLa a = Peeler control 0 Disables Peeler. 1 Enables Peeler. Example: CL1 Placement: Following the Q Print Quality command. Default: Peeler is disabled Command Function To control the cutting of labels when using Peeler unit with the printer. Input to Printer A H20V20WB1TEST LABEL Q3 CL1 Z Special Notes 1. You must have the optional printer Peeler installed to use this function. Contact your OKI representative for more information. 2. Sending a Peeler Enable command to a printer without a Peeler installed will halt the printer except you press the FEED button.. 35
![](/manual_guide/products/oki-data-x400-x400-programming-command-manual-82e8f1d/37.png)
Peeler Command
Command Structure
<ESC>CLa
a
=
Peeler control
0
Disables Peeler.
1
Enables Peeler.
Example:
<ESC>CL1
Placement: Following the <ESC>Q Print Quality command.
Default:
Peeler is disabled
Command Function
To control the cutting of labels when using Peeler unit with the printer.
Input to Printer
<ESC>A
<ESC>H20<ESC>V20<ESC>WB1TEST LABEL
<ESC>Q3
<ESC>CL1
<ESC>Z
Special Notes
1.
You must have the optional printer Peeler installed to use this function. Contact
your OKI representative for more information.
2.
Sending a Peeler Enable command to a printer without a Peeler installed will
halt the printer except you press the FEED button..
35