Panasonic KX-MB1500 Operating Instructions - Page 16
Manual input tray - printer
View all Panasonic KX-MB1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
1. Introduction and Installation 1.8.2 Manual input tray You can use the manual input tray for printing with the computer and for copying. It can hold one page at a time. When printing or copying multiple pages, add the next page after the first page has been fed into the unit. R Please refer to page 73 for information on recording paper. R When printing with the computer, custom size recording paper can also be used. R The unit is set for printing letter-size plain paper by default. - To use other paper sizes, change the recording paper size setting (feature #381 on page 48). - To use thin or thick paper, change the recording paper type setting (feature #384 on page 49). 1 Adjust the width of the guides (A) to the size of the recording paper. 2 Insert the paper, print-side up (B) until the unit grasps the paper and a single beep is heard. A Therefore, if you print with the cover closed, the paper may jam inside the unit. B Note: R To print from the manual input tray; - when printing with the computer, select #2 for the printer properties. - when making a copy, set the copy input tray setting to "#2" beforehand (feature #460 on page 54). If these settings are not changed, when printing or copying multiple pages, the 1st page will be printed from the manual input tray, but the rest of the pages will be printed from the paper input tray. R If the paper is not inserted correctly, re-adjust the paper, or the paper may jam. When printing on thick paper R When you use thick paper for the recording paper, be sure to open the rear cover before start printing. Thick paper will be printed out from the rear side. 16 For assistance, please visit http://www.panasonic.com/help