Panasonic KX-MB1500 Operating Instructions - Page 34
Sending a fax manually
View all Panasonic KX-MB1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
6. Fax (KX-MB1520 only) 6.1 Sending a fax manually 6. . Fax (KX-MB1520 only) MFaxN To select the contrast Adjust this setting depending on the darkness or lightness of the document. 5 levels (low to high) are available. 1. Press MQualityN repeatedly to display "CONTRAST". 2. Press MCN or MDN to change the contrast. 3. MSetN Note: R You can save the previous contrast setting (feature #462 on page 49). MRedialN MSP-PhoneN MStartN MQualityN MSetNMCNMDN To select the resolution 1. Press MQualityN repeatedly to display "RESOLUTION". 2. Press MCN or MDN to change the resolution. - "STANDARD": For normal-sized characters. - "FINE": For small-sized characters. - "SUPER FINE": For very small-sized characters. - "PHOTO": For photographs, shaded drawings, etc. 3. MSetN R Using the "FINE", "SUPER FINE" and "PHOTO" settings will increase transmission time. 1 If the MFaxN light is OFF, turn it ON by pressing MFaxN repeatedly. 2 Set the original (page 18). 3 If necessary, change the resolution and contrast according to the type of document. R To select the contrast, see page 34. R To select the resolution, see page 34. 4 Dial the fax number. 5 Press MStartN to scan the document into memory. Wait until "SCAN:PRESS SET" "SEND:PRESS START" is displayed. 6 To send a single page: Press MStartN. To send multiple pages: 1. Place the next page on the scanner glass. A MSetN R To send more pages, repeat this step. 2. When all pages are scanned, press MStartN. Note: R To stop sending, see page 58. R While talking to the other party using the MSP-PhoneN, you can send a fax using the scanner glass by pressing MStartN, and then M1N (To receive a fax, press M2N). R You can change the default operation mode (feature #463 on page 49) and the timer before returning to the default operation mode (feature #464 on page 49). To redial the last number MRedialN R If the line is busy, the unit will automatically redial the number 1 time. Note: R To stop sending, see page 58. Reserving the fax transmission (Dual Access) You can reserve a fax transmission even when the unit is just receiving a fax or sending a fax from memory. - Up to 3 reservations when sending - Up to 4 reservations when receiving 1. Set the original during fax reception or fax memory transmission. 2. Enter the fax number using the dial keypad or phonebook. 3. MStartN R The unit will scan 1 page. Place the next document on the scanner glass and press MSetN. Repeat this until all the documents are scanned, then press MStartN. R If the document exceeds the memory capacity, the reservation for that document will be canceled. You must send the entire document manually. Printing a confirmation report A confirmation report provides you with a printed record of transmission results. To print the confirmation reports, make sure that feature #401 is activated (page 50). For an explanation of the messages, see page 59. 34