Panasonic KX-MB1500 Operating Instructions - Page 3
For your safety, For best performance - all in one laser printer
View all Panasonic KX-MB1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Important Information For your safety Laser radiation CLASS 1 LASER PRODUCT R The printer of this unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Laser diode properties Laser output : Max. 10 mW Wavelength : 760 nm - 800 nm Emission duration : Continuous IEC 60825-1 : 2007 LED light CLASS 1 LED PRODUCT R When using the unit, do not look directly at the CIS's LED light. Direct eye exposure can cause eye damage. CIS's LED light properties LED radiation output : Max. 1 mW Wavelength : Red 630 nm typical Green 520 nm typical Blue 465 nm typical Emission duration : Continuous Fuser unit R During or immediately after printing, the fuser unit (A) gets hot. This is normal. Do not touch the fuser unit. Note: R The area near the rear cover (B) may also get warm. This is normal. AB For best performance Toner cartridge R When replacing the toner cartridge, do not allow dust, water, or liquids to come in contact with it. This may affect print quality. R For optimal performance, genuine Panasonic toner cartridge is recommended. We cannot be responsible for problems that may be caused by a non-Panasonic toner cartridge: - Damage to the unit - Poor print quality - Improper operation R Do not leave the toner cartridge out of the protective bag for a long time. It will affect the printing quality. R Read the instructions on page 10 before you begin installation of the toner cartridge. After you have read them, open the toner cartridge protective bag. The toner cartridge contains a photosensitive drum. Exposing it to light may damage the drum. - Do not expose the toner cartridge to light for more than 5 minutes. - Do not touch or scratch the green drum surface. - Do not place the toner cartridge near dust or dirt, or in a high humidity area. - Do not expose the toner cartridge to direct sunlight. R To extend the life of the toner cartridge, the power should never be turned OFF immediately after printing. Leave the power turned ON for a minimum of 30 minutes after printing. Location R To avoid malfunction, do not position the unit near appliances such as TVs or speakers which generate an intense magnetic field. Static electricity R To prevent static electricity damage to the interface connectors or other electrical components inside the unit, touch a grounded metal surface before touching the components. Environment R Keep the unit away from electrical noise generating devices, such as fluorescent lamps and motors. R The unit should be kept free from dust, high temperature and vibration. R The unit should not be exposed to direct sunlight. R Do not place heavy objects on top of the unit. When you leave the unit unused for a long period of time, unplug this unit from the power outlet. R The unit should be kept away from heat sources such as heaters, kitchen stoves, etc. Damp basements should also be avoided. For assistance, please visit http://www.panasonic.com/help 3